Filter
Top Products
Appendix B — Configuring SIP Settings in the Boot Program
- 47 -
Network Settings in the Boot Program
Modifying Network Settings in the Boot Program
To modify the network settings in the boot program:
1. Plug the DC adapter cord into the power input, and press and hold
and at the
same time
until NETWORK SETTINGS? appears on the display.
2. Press YES. MODIFY SETTINGS? appears on the display.
3. You can choose to either enter the new settings yourself or restore the factory default
settings.
To enter the new settings:
− Press YES. NETWORK TYPE: <current type> appears on the display.
− Press CHANGE, and then press the desired network type (i.e. LAN, xDSL, Cable).
NETWORK TYPE <new type> appears on the display.
− Press ACCEPT. STORE CHANGES? appears on the display.
Note: If the phone is in xDSL mode, you will be prompted to enter your
administrator user name and password (use 6 to backspace or delete).
− Press YES. “SAVING TO NVRAM. Do not remove power” appears on the display,
followed by NVRAM SAVE COMPLETE and REBOOT NOW?.
− If you have completed all desired changes, press YES to reboot the phone for the
changes to take effect (when the date and time appear, the phone is ready for use). If
you want to make further changes, press NO. EXIT MENU? appears on the display.
To return to the main menu, press YES.
OR
To restore the factory default settings:
− Press DEFAULT. USE FACTORY DEFAULT? appears on the display.
− Press YES. STORE CHANGES? appears on the display.
− Press YES. The factory defaults are restored and the phone reboots. When the date
and time appear on the display, the phone is ready for use.
Static Network Parameters in the Boot Program
Configuring Network Parameters in the Boot Program
If a DHCP server is not available in your SIP setup, manually configure the basic SIP network
parameters in the main program using the Superkey Menu Interface or the Web
Configuration Tool. If connectivity to the main program is lost, conduct the configuration
during the boot program.
To configure basic static SIP network parameters in the boot program:
1. Plug the DC adapter cord into the power input, and press and hold
and at the
same time until NETWORK SETTINGS? appears on the display.