Filter
Top Products
APPENDIX C: APPLICATION NOTES
DEFINITY Communications System
7400B Data Module
Page C-2
User’s Guide
PROCOMM PLUS Procomm Plus is a data communications software package produced by
Configuring the Software
1.
Datastorm Technologies, Inc. The following procedures are based on
version 1.1B of the software package.
Note:
If Procomm Plus is being installed for the first time select
Hayes 2400 as the modem type.
To begin Procomm Plus, at the DOS prompt type
pcplus
[ Enter ]
Press any key to display the Terminal Mode screen.
Press
[ Alt ] [ s ]
to display the
SETUP FACILITY
menu.
Select Modem Options.
Check that the options displayed on your screen match those in the
2.
3.
4.
5.
menu below. Change any options that do not match.
A –
B –
ATDT
C –
ˆM
D –
˜˜˜+++˜˜˜ATH0ˆM
E –
PROCOMM PLUS SETUP UTILITY
MODEM OPTIONS
Initialization command . .
ATE1V1X4Q0&C1&D2 S7=255 s0=0ˆM
Dialing command . . . . . . . . .
Dialing command suffix . .
Hangup command . . . . . . . . . . ..
Auto answer command . . . . .
Wait for connection . . . . .
Pause between calls . . . . .
Auto baud detect . . . . . . . .
Drop DTR to hangup . . . . .
Send init if CD high . . . .
Alt-z:
Help Press the letter of the option to change: Esc: Exit
˜˜˜+++˜˜˜ATS0=1ˆM
F –
45 seconds
G –
4 seconds
H –
ON
I –
YES
J –
YES
6.
When you are finished, press [ Esc
] to return the SETUP
UTILITY
menu.
7.
Select Result Messages.
8.
Check that the options displayed on your screen match those in the
menu below. Add the messages for options D, E, and F.