Filter
Top Products
APPENDIX A: AT COMMAND SET
DEFINITY Communications System
7400B Data Module
Page A-18
User’s Guide
Command:
&Z
Function:
Store a telephone number.
Type:
immediate
Arguments:
The &Z command accepts one of four arguments (0 through 3), which
designates the memory location in which the dialing string that follows
the command will be stored.
S-Register:
none
Example:
at&z2=555-1212
[ Enter ]
Comments:
In the example, the dial string 555-1212 is stored in memory location
2. Each of the four number storage locations can store a maximum of
25 characters.
See Also:
Chapter 4, “Operation and Configuration.”