Filter
Top Products
77
5
Synchronising Information With Your Computer
5.5 Synchronising with Your Computer
Connect your device to the PC using the USB cable, Bluetooth or Infrared
connection. Windows Mobile Device Center or ActiveSync then opens and
lets you synchronise.
Note If you are synchronising directly with Exchange Server, you can use
this connection to the PC to “pass through” to the network, or you can
synchronise without connecting to the PC over a cellular network. For more
information on synchronising with the Exchange Server, see Chapter 10.
Start and stop synchronisation
You can manually synchronise either from your device or PC.
From your device
1.
Tap Start > Programs > ActiveSync.
2. Tap Sync.
3. To end synchronisation before it completes, tap Stop.
From Windows Mobile Device Center on your PC
1.
Tap Start > Windows Mobile Device Center.
2. Tap
at the lower left of the Windows Mobile Device Center.
3. To end synchronisation before it completes, tap
.
From ActiveSync on your PC
When you connect your device to your PC, ActiveSync automatically opens
on your PC and synchronises.
1. To manually start synchronisation, tap
.
2. To end synchronisation before it completes, tap
.
Change which information is synchronised
You can change the information types and the amount of information to
synchronise for each type either from your device or your PC. Follow the
steps below to change synchronisation settings from your device.
Ch05_English_Manual.indd 77 2007/6/8 上午 12:15:02