Filter
Top Products
196
12
Managing Your Device
To close a program
Tapping the button in a program may just close the program screen. In
this case, the program continues to run in the background. You can end
running programs manually by following these steps:
1. Tap Start > Settings > System tab > Memory > Running Programs
tab.
2. In the Running Programs List, tap the program you want to close,
and tap Stop.
12.4 Resetting Your Device
Occasionally, you may need to reset your device. A normal (or soft) reset
of your device clears all active program memory and shuts down all
active programs. This can be useful when your device is running slower
than normal, or a program is not performing properly. A soft reset is
also necessary after the installation of some programs. If a soft reset is
performed when programs are running, unsaved work will be lost.
To perform a soft reset
•
Use the stylus to press the Reset
button found on the bottom
side of your device. Your device
restarts and displays the Today
screen.
Reset button
Using Clear Storage
Clear Storage lets you clear all storage data and reset all seetings back to
manufacturer's default settings.
Warning: You will lose all your data when you use Clear Storage.
You can use Clear Storage by following these steps:
1. Tap Start > Settings > System tab, then tap Clear Storage.
2. Entering 1234, then tap Yes.
Ch12_English_Manual.indd 196 2007/6/8 上午 12:24:53