HTC TRIN100 PDAs & Smartphones User Manual


 
19
1
Getting Started
No. Item Function
1 Notification LED
1
This LED shows a blinking Blue light for Bluetooth system
notification of powered-up and ready to transmit Bluetooth
signal, or a blinking Green light for Wi-Fi status. When
both Bluetooth and Wi-Fi are enabled, their lights blink
alternately.
2 Notification LED
2
This bi-color LED shows Green and Amber lights for UMTS/
GSM/GPRS/ EDGE standby, message, and network status as
well as for notification and battery charging status.
3 Second Camera Use this camera for video call conversations or to take self
landscape photos.
4 Touch Screen Tap the screen with the stylus to write, draw, or make a
selection.
5 Talk Button Press to answer an incoming call or dial a number.
6 Start Button Press to open the start menu
7 Left Soft
Key
Press to execute the command shown in the label above the
button.
8 Navigation
Control/Enter
Press this multi-directional control up, down, left, or right to
move through menus and program instructions; carry out
the selection by pressing the center button.
9 Right Soft
Key
Press to execute the command shown in the label above the
button..
10 OK Button Press to confirm your data entries, or to exit the program in
use.
11 End Button Press to end a call or to return to the Today screen.
12 Volume Slider • Slide up or down to adjust the speaker volume.
• During a call, slide up or down to adjust the earpiece
volume.
13 OK Button Press to confirm your data entries, or to exit the program in
use.
Ch01_English_Manual.indd 19 2007/6/8 上午 12:04:15