HP (Hewlett-Packard) 540 Series PDAs & Smartphones User Manual


 
Chapter 9 | Troubleshooting | 101
Network connection problems
The following solutions may help if you encounter problems when using a
network card for network connections. Additional troubleshooting information
is available in Connections Help on the device and ActiveSync Help on the
desktop PC.
Verify that your NIC is compatible with the HP Jornada 540 Series Pocket
PC.
Verify that you have added necessary server information. On the Start
menu, tap Settings. On the Connections tab, tap Network. Tap your
installed adapter (usually your Ethernet card's name) and enter any
necessary information. Most networks use DHCP, so you should not have
to change these settings unless your network administrator instructs you
to do so.
If Network Connection isn't listed as a connection method in the
ActiveSync dialog box when starting synchronization, wait a few minutes
and try again. Also, if synchronization does not start right away, the
network is probably busy, and it may take a minute for your device to
connect to the network.
Make sure that the proper drivers for your card are installed on the device.
For more information, see the owners manual for the network card.
Verify with your network administrator that your user name and password
are correct.
Verify with your network administrator that the network you are trying to
connect to is available, or try to connect to it from another computer.
You may need to change the device name if you are trying to connect to a
network and cannot because another device with the same name is
already connected. To change the device name, on the Start menu, tap
Settings. On the System tab, tap About, and then the Device ID tab.
Cable and cradle connection problems
The following solutions may help if you encounter problems when connecting
to your desktop PC. Additional troubleshooting information is available in
Connections Help on your HP Jornada and ActiveSync Help on your desktop
PC.
Ensure the device is turned on.
If a modem or Ethernet card is inserted into your device, remove it.
Ensure that you do not have any other active connections. On the Start
menu, tap Today. Tap or at the bottom of the screen and then
tap Disconnect.