Filter
Top Products
QUICK REFERENCE GUIDE
9
QUICK REFERENCE GUIDE
Change system number - Press SYS or or SYS (1-99) [pg 21]
Change group number - Press GRP or or GRP (1-99) [pg 21]
System scan on/off - FCN SCAN ( indicates scanning is enabled) [pg 40]
Change scan list status of displayed system - FCN S.A/D ( indicates that
the system is in the scan list and scanned normally)
[pg 42]
Change scan list status of displayed group - FCN G.A/D ( indicates that the
group is in the scan list and scanned normally)
[pg 42]
Change between alpha and numeric display modes - FCN STR [pg 20]
Display home or last active system/group - FCN HOME [pg 26]
Select/Exit Menu Mode - FCN MENU [pg 35]
Lock/Unlock Keypad - FCN ( indicates locked keypad) [pg 22]
Adjust Squelch (conventional only) - FCN SQL then and [pg 48]
NUMBER DIALING
Select dial mode without changing system/group - FCN DIAL [pg 37]
Select dial mode and telephone system/group - FCN PHONE [pg 37]
Transmit number in display - Briefly press PTT sw then FCN SND [pg 38]
Erase last number in display - CLR [pg 38]
Erase entire number in display - RCL CLR [pg 38]
Display overflow digits - FCN [pg 38]
Enter a pause - FCN [pg 38]
Store a number in memory - Enter no., then FCN STR (0-9) [pg 38]
Display numbers in memory - RCL (hold down to repeat) [pg 39]
Recall number from a memory location - FCN RCL (0-9) [pg 39]
Recall last number dialed - FCN RCL [pg 39]
Recall last number dialed from memory - FCN RCL [pg 39]
Exit dial mode and terminate call - FCN PHON [pg 39]
Exit dial mode without terminating call - FCN DIAL [pg 39]
BUSY
G
S
UID
Tx
P
2
C
L
System
Scan List
Phone
Group
Group Scan
List
Scan
Call
8-Character
Alphanumeric
Monitor
Keypad
Dial
Mode
Low
Power
Priority
Transmitter
Keyed
Lock
UID/Aux
Group
Low
Battery
Conv Ch
Busy
Display
S
G
For more information on a function, refer to the page number in brackets [xx].