Filter
Top Products
CONTROLS AND DISPLAY
14
- Indicates that the conventional monitor mode has been enabled by
the Monitor option switch (see page 49).
- “
P” indicates that the displayed group is an LTR-Net/LTR priority
1 group, and “
P2” indicates that it is a priority 2 group (see page 45).
- Indicates that the displayed group is in the scan list and scanned
normally (see page 42).
BUSY - Indicates that the selected conventional channel is currently busy
with voice or other traffic.
- Indicates a low battery condition. The battery should be
recharged or replaced as soon as practical (see page 23).
UID - Indicates that the displayed group is programmed for an LTR-Net
Unique ID or Directed Group call (see page 46).
- Indicates that the keypad has been disabled by pressing FCN
(page 22).
Tx - Indicates that the transmitter is keyed (push-to-talk switch pressed).
P
2
G