Filter
Top Products
LTR-NET FEATURES
46
LTR-NET FEATURES
NOTE: Other LTR-Net features are described starting on page 45.
LTR-Net Standard Calls
Standard group calls are between two mobiles or between a mobile
and a control station. To place these calls in the LTR-Net or LTR mode,
simply select the desired group and press the PTT switch (no number is
dialed) as described starting on page 27.
LTR-Net Special Calls
The LTR-Net Special calls are as follows:
Telephone Calls
- These calls allow you to place and receive telephone
calls using your transceiver. They are described starting on page 30.
Auxiliary Calls
- As shown in the preceding illustration, these calls include
Unique ID and Directed Group calls. Unique ID calls are to specific
mobiles, and Directed Group calls are to specific talk groups. Refer to
page 32 for information on placing and receiving Auxiliary calls.
Busy Queuing
If system resources are not available when placing special calls,
queuing may be provided by the radio system. Standard group calls are
not queued. When a call is placed in a queue, a voice message informs
you that this has occurred. Then when resources become available, the
call is automatically placed and the normal ringing or other tones are
heard if applicable. If the call cannot be placed in the allotted time, it is
terminated and another message informs you that this has occurred.
Special
Telephone
Auxiliary
Directed Group
Unique ID