Filter
Top Products
BASIC OPERATION
21
modes, press FCN STR. Turning power off does not change the selected
mode. These modes operate as follows:
Numeric Mode
- The system and group numbers are displayed as “Sxx
Gxx” and the group alpha tag is not displayed. For example, System 1
and Group 2 are displayed as follows. When only group scanning is
occurring, the group number is replaced by dashes and the system
number continues to be displayed (see page 40).
Numeric Display Mode
Alpha Tag Mode - The group alpha tag is displayed and the system and
group numbers are not displayed. For example, the “CAR 220” system is
displayed as follows. There is no special group scan indication when only
group scanning is occurring.
Alpha Tag Display Mode
System and Group Select
Systems and groups are selected by the keypad SYS and GRP keys
and one or more other keys as follows:
• To increase the selected system, press SYS and then . Likewise, to
increase the selected group, press GRP . Holding the key down
causes the function to repeat. After the highest system or group is
selected, a tone sounds and wrap-around to the lowest system or group
occurs.
• To decrease the selected system, press SYS and then . Likewise, to
decrease the selected group, press GRP . Holding the key down
causes the function to repeat. After the lowest system or group is