Filter
Top Products
TELEPHONE CALLS
30
TELEPHONE CALLS
General
NOTE: Telephone calls can be placed and received only if that service is
available to you and your transceiver has been programmed
appropriately.
The telephone calling feature allows you to place and receive tele-
phone calls using your transceiver. The following information describes
how these calls are made with LTR-Net and LTR operation. If you can
make telephone calls with conventional operation, the procedure may be
somewhat different and your system operator may provide additional
information. Proceed as follows:
Placing Telephone Calls
1. Turn transceiver power on and set the volume as described starting on
page 20.
2. Select the dial mode and a telephone group as follows. When the dial
mode is selected, the handset portion of the telephone icon is
displayed, and then when a telephone group is selected, the base portion
is displayed.
• To select the dial mode and a preprogrammed telephone group, press
FCN PHONE.
• To select the dial mode without changing the selected group, press
FCN DIAL. Then manually select a telephone group if required.
3. Dial the desired number using the keypad or recall it from memory by
pressing FCN RCL and the location number (0-9). Refer to the dial
mode description starting on page 37 for more information.
4. To send the telephone number, briefly press the PTT switch to access
the system and then press FCN SND. Landside ringing (or busy) should
then be heard. The following conditions may also occur: