SAFETY TRAINING INFORMATION
4
SAFETY TRAINING INFORMATION
WARNING
This radio produces RF electromagnetic energy when transmitting and is
designed and classified for “Occupational Use Only”. Radio equipment
with this classification must be used only during the course of employ-
ment by individuals aware of the hazards and the ways to minimize such
hazards. This radio is NOT intended for use by the General Population in
an uncontrolled environment.
This radio has been tested and complies with FCC RF exposure limits for
“Occupational Use Only”. In addition, it complies with the following
standards and guidelines with regard to RF energy and electromagnetic
energy levels and evaluation of such levels for exposure to humans:
• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields.
• American National Standards Institute (C95.1-1992), IEEE Standard
for Safety Levels with Respect to Human Exposure to Radio
Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
• American National Standards Institute (C95.3 -1992), IEEE Recom-
mended Practice for the Measurement of Potentially Hazardous
Electromagnetic Fields - RF and Microwave.
CAUTION
To ensure that your exposure to RF electromagnetic energy is within the FCC
allowable limits for occupational use, always adhere to the following guidelines:
• DO NOT operate the radio without the proper antenna attached. This may
damage the radio and cause FCC RF exposure limits to be exceeded. The
proper antenna is the antenna supplied with the radio by the manufacturer
or an antenna specifically authorized by the manufacturer for use with this
radio.