Filter
Top Products
MISCELLANEOUS
55
BUSY - Indicates that the LTR-Net or LTR radio system is currently busy
(see “Busy Tone” on page 52).
CALL SVC - Indicates that the transceiver is inoperative. Contact your
system operator for service.
DSBL BSY - Indicates that the transmitter is disabled by the conven-
tional Transmit Disable On Busy feature (see page 50). It also indicates
that the transmitter was keyed while receiving an LTR-Net or LTR call.
FCN - Indicates that the function select mode is selected by the FCN
option switch (see page 15).
LCL SRCH - Indicates that the transceiver is currently searching for a
new locality (site) on which to register (see page 47).
Model - The last seven digits of the transceiver part number are indicated
very briefly in the display when transceiver power is turned on. This
number indicates such things as frequency band, power output, and tier of
the transceiver. The eighth digit is reserved and always “0”.
NO ACESS - Indicates that the radio system could not be accessed,
perhaps because of an out-of-range condition. Refer to “Operation At
Extended Range” on page 60 for more information.
NO PHONE - Indicates that there is no telephone group programmed in
the current system when the dial mode is selected by pressing FCN
PHONE (see page 37).
NOT AUTH - Indicates that an attempt was made to register on a site
where service was not authorized (see page 47).
NOT CONV - Indicates that an attempt was made to enable a conven-
tional mode feature on an LTR-Net or LTR system.
NOT LNET - Indicates that an attempt was made to enable an LTR-Net
mode feature on an LTR or conventional system.