Filter
Top Products
CONTROLS AND DISPLAY
16
SYS (RCL)
Standard Mode
SYS - Selects the next higher system.
SYS - Selects the next lower system.
SYS (xx) - Directly selects specified system.
FCN RCL - Momentarily displays the revert (selected) system if it
is not already being displayed.
Dial Mode
RCL - Scrolls through the numbers programmed in memory.
FCN RCL (0-9) - Recalls the number stored in the specified
memory location.
FCN RCL - Recalls the last number dialed from memory.
FCN RCL - Recalls the last number dialed.
GRP (CLR)
Standard Mode
The GRP key functions the same as “SYS” just described to change
or display the selected group.
Dial Mode
CLR - Erases the last digit in the display.
FCN CLR - Erases the entire number in the display.
1 (HOME)
Standard Mode
FCN HOME - Selects the preprogrammed home system/group.
1 - Pressing this key with the PTT switch pressed transmits the “1”
digit.
Dial Mode
1 - Dials the “1” digit.
2 (PHONE)
Standard Mode
FCN PHONE - Selects the dial mode and a telephone group in the
current system.
2 - Pressing this key with the PTT switch pressed transmits the “2”
digit.