Filter
Top Products
INDEX
61
Licensing
A government license is usually required to operate this transceiver
on the air. Your system operator will normally handle the licensing
requirements.
Transceiver Service
If your transceiver is not operating properly, “OUT-LOCK”, “PROG
ERR”, “SLEEPING”, or “CALL SVC” may be displayed. It may be
possible to clear the first two conditions by turning power off and then on
again to reset the control logic. Also, make sure that the controls are
properly set and the battery is fully charged. If the transceiver still does
not operate properly, return it to your system operator for service.
The “SLEEPING” message indicates the transceiver is temporarily
disabled as described on page 56. If the CALL SVC message is
displayed, the transceiver must be returned to your system operator for
service.
NOTE: There are no user serviceable components in the transceiver.
Altering internal adjustments can cause illegal emissions, void the
warranty, and result in improper operation that can seriously damage the
transceiver.
INDEX
A
Accessory Connector 12
Alpha Tag Display Mode 21
Alphanumeric Display 13
Antenna Jack 12
Auxiliary Call 46
Placing 32
Receiving 33
B
Backlight 20
Battery Charger 59
Battery Pack 57
Battery Release Button 12
Busy Queuing 46
Busy Tone 52
C
Call Guard Squelch 51
Call Indicator 13, 25
Charge Time 59
Charger Indicators 60
Clear-to-Talk Tone 26
CLR Key 16