Filter
Top Products
Viewing and Editing Configuration Parameters
Copyright © 2005-2006 Eaton Corporation. All Rights Reserved.
IPN 997-00012-41D December 2006
5-7
Viewing and Editing Configuration Parameters
Configuration Mode displays only those configuration parameters that are most likely to be
changed on-site. Configuration parameters configurable from the front panel are changed in
Edit Mode.
For viewing and editing all other configuration parameters a laptop computer or remote
access is required. See Chapter 3 for details about the standard communications options.
► To view and edit a configuration parameter
1 From Main Display Mode, press the
key to enter Configuration Mode.
2 Press the
key to scroll down to the required parameter.
3 Press the
key to enter Edit Mode.
4 Press either the
or key to change the value as appropriate.
5 Press the
key to save the new value and return to Configuration Mode, or
6 Press the
key to cancel the change and return to Configuration Mode.
7 Press the
key to return to Main Display Mode.