Filter
Top Products
6.7.3. Speakerphone
While the speakerphone is activated, press the up and down VOLUME buttons to set desired
speakerphone volume.
6.7.4. Intercom Speaker
While using the intercom or receiving a page, press the up and down VOLUME buttons to set desired
intercom speaker volume. The speaker volume levels for the intercom and for outside calls are
independent of each other. You may, for example, set your speakerphone so that a caller’s voice will be
at a normal level, yet intercom pages will come through at a louder volume.
6.7.5. Discrete alert
While the phone is on-hook and idle, press HOLD. Then press the up and down arrows of the
VOLUME buttons to set desired discrete alert volume. There are 8 levels to select from. With each
press, the phone will ring once at the new discrete alert volume. The discrete alert volume setting
governs the volume of off-hook ringing, off-hook intercom ringing, the held call reminder, and the line
reserve alert.
6.8. Voice Mail (Message Waiting)
The 2750 supports external Voice Mail indicators. The commercial telephone company will supply
either FSK or Stutter Dial tone. When using external VM, the LCD will display a message to alert you
that there is a message and what line it is on. Section 4.2.1 Message Waiting Line Selection will allow
you to set indicator to Line1, 2, 3, 4, or OFF. Section 4.2.2 Message Waiting Mode Selection will
allow you to set either FSK or Stutter Dial Tone as the signal type.
In most cases you will only set one telephone to receive the external message waiting signal. If you
have multiple external mail boxes then each box must be on a different telephone.
When you receive a message, your display will show the following.
6.8.1. Accessing Messages
Dial the number for your voice mail service. You may wish to store this number in one of your phone’s
memory locations for easy access.
6.8.2. Resetting MSG Lamp
If your MSG lamp continues to flash after you have retrieved your messages, you may turn it off
manually by following the following instructions:
a. Press MENU. The display will read “Phone Setting”
b. Press the DOWN ARROW until “Message Lamp” appears in the display.
c. Press the soft key under RESET.
35 2750 User Guide Version 1.3