Filter
Top Products
6.5.2. Blind Transfer
a. Press the TRANSFER button.
b. Dial the desired two-digit station number to transfer the call to that station. If the desired station
does not answer, it will stop ringing after one minute. To re-engage the call press the flashing
LINE button. The call can be answered at any telephone by pressing the flashing LINE button.
6.5.3. Transfer Ring
You may transfer an outside call to all stations by using the transfer ring. If you answer a call that is not
for you, and you do not know where to direct it, press TRANSFER twice. All of the other phones will
ring in the transfer ring and the call will be transferred to the next answering station. The call will
remain on hold at your station until another station picks up the call.
6.5.4. Personal Ring
The 2750 telephone also features eight unique personal transfer rings. You may assign each person their
own personal ring. Calls can then be transferred to them using this ring. This feature is helpful if you
wish to transfer a call to a person who may not always be at a particular phone. Many people find this
method of transferring a call more professional and unobtrusive than the traditional method of using
voice pages to call people to the phone.
To use this feature, press TRANSFER and then the desired dial pad number buttons. All the other
phones will now ring with the personal ring represented by that number.
6.6. Caller ID
The Caller ID feature works in conjunction with Caller ID service offered by your local telephone
company. The 2750 can store up to 50 of your most recent calls. In order for this feature to work, you
must subscribe to the Caller ID service from your local telephone company. Call waiting caller ID may
not be available in all areas that offer caller ID service, and may cost more than basic number caller ID
service. Also, please note that you must order Caller ID service separately for each line on which the
service is desired.
6.6.1. Incoming call
The caller ID information will be displayed automatically. There is no need to press the CALLS
button.
6.6.2. Call Waiting Caller ID
When you are on the line and another call comes in, the display will automatically display the caller ID
information. To answer that call, press FLASH. To return to the previous call, press FLASH again.
6.6.3. Caller List
6.6.3.1 Reviewing Calls
To review previous calls, press the CALLS button and use the up and down arrow buttons under the
display to scroll through the caller list. The display will indicate the number of new calls in the caller
list, as well as the total number of calls in the caller list. A “new” call is one that has not yet been
viewed.
33 2750 User Guide Version 1.3