Filter
Top Products
button at any time to return to your original call and disconnect the second call. If you wish to keep the
second call, you must remember to place it on hold before returning to the original call. You can switch
between lines as much as you want during the course of a call. Always remember to place your current
call on hold before seizing another line, or you will disconnect your current call.
6.3.3. Answering a call on another line
While having a conversation on one line, if a call comes in on another line, its line lamp will begin
flashing and a double ring will sound every 15 seconds. If an incoming call is coming in on a line that
is set to “ringer off”, the alerting ring will not sound.
You may answer the call by pressing the flashing LINE button. Remember to put the first call on hold
before answering the incoming call, or the first call will be disconnected.
6.4. Conference
Your 2750 allows you to make conference calls with two other parties. You may conference either two
outside lines or one outside line and one intercom station.
6.4.1. Outside Calls
a. Make or answer a call.
b. Press HOLD.
c. Make or answer a call on another line.
d. When the second call is connected, press the CONFERENCE button. The lines are
immediately conferenced.
e. Hang up to end the conference call. You may press a LINE button if you wish to continue the
call with the party that line. The other line will be disconnected.
6.4.2. Outside Call with Intercom Station
a. Place an intercom call to the desired station. The outside call is automatically placed on hold.
b. After the person at the other station answers, press the CONFERENCE button to create a
conference call.
c. Hang up to end the conference call. The person at the other station may remain connected to the
outside call. Another way to conference an intercom station to an outside call is to press the
appropriate LINE button at the second intercom station. Note that System Call Privacy must be
OFF for this method to work. See Section 2.9. If you wish to talk privately with one party
during a conference call, press HOLD to place both lines on hold, and then press a LINE
button to talk with the person on that line. Press CONFERENCE to resume the conference call.
6.5. Transfer
6.5.1. Attended Transfer
a. Place an intercom call to the desired station. The outside call is automatically placed on hold.
b. When the intercom party answers, announce that you are transferring the call. If the other 2750
station does not wish to be transferred the call, press the LINE button to return to the outside
call.
c. Press the TRANSFER button.
32 2750 User Guide Version 1.3