Filter
Top Products
#----------------------------------------------------------------------
# Softkey Settings (Vertical 480i)
# ================================
# Softkeys can be set either server wide through the “aastra.cfg”
# file or unique to each phone through the “<mac>.cfg” file.
# Notes: Currently, there are a maximum of 20 user definable
# softkeys that can be configured on the 480i phone. These can be
# set up through either of the 2 configuration files, depending on
# whether this is to be server wide ("aastra.cfg") or phone specific
# ("<mac>.cfg"). Each softkey needs to be numbered from 1 - 20, for
# example "softkey12 type: speeddial". Softkeys can be set up as
# speeddials and have a type, label, value and state associated with
# them.
# There are usually 4-6 available softkey positions per menu from
# top left to bottom right, depending upon which state the softkeys
# are defined for. Softkeys are positioned based on their number.
# The softkey with the lowest number will always appear in the first
# position. For example, if softkeys 8, 3, 12 and 7 are defined for
# a state, softkey3 will have the first available position in the
# top left, followed by softkey7, softkey8 and softkey12. This does
# not control the positioning of automatically added state specific
# softkeys.
# SOFTKEY STATES: User-defined softkeys are configurable for 4
# different phone states that determine where the
# softkeys will be displayed:
# "idle" = when the phone isn't being used
# "connected" = when the phone is connected to a
# remote party (could be on hold)
# "outgoing" = when the user is dialing a number
# "incoming" = when the phone is ringing
# A softkey can be defined to appear in more than
# one state by listing the states (do not use commas
# to separate list items). For example:
# softkey1 states: idle connected
# softkey1 type: speeddial
# softkey1 label: "Sales Group"
# softkey1 value: 301
46 SIP 480i IP Phone Admin Guide