Filter
Top Products
4. Select options 1-5 to change the
information about the registrar
and the proxy server.
5. Select option 6. User Name to
change the user name.
6. Select option 7. Display Name to
change the display name.
7. Select option 8. Screen Name to
change the screen name.
8. Select option 9.Auth. Name to
change the authentication name
9. Select option 10. Password to
change the user’s password.
10. Select option 11. Nortel to
identify if a Nortel call server is
being used.
From the Web Client:
1. Click on the SIP Settings sub-
category under the ADMIN main
category.
2. Enter the administrator user
name and password (the default
user name is “admin” and
password is “22222”).
3. In the web page that just opened
enter the appropriate information.
4. Click on the Set Values
button to save the changes that
you just made.
NOTE:
At this point modifications performed to the User name, Screen name,
Authentication name and Password affect line 1 of the 480i only. Modifications to the
other lines should be done through the <mac>.cfg file.
SIP 480i IP Phone Admin Guide 9