Filter
Top Products
Configurable through the configuration files only
Parameter softkeyN value
Description
If the softkey is of type, line then value should be the line
number that this soft key represents, from 5 up to 9 (1-4 are
already hardcoded as the L1, L2, L3 and L4 hard key
line/call appearances).
If the softkey is of type, speeddial then value should be the
number to speed dial.
Text
Format
Not Applicable
Default Value
line or speeddial. N in the softkeyN value ranges from 1 to
20
Range
softkey1 value: 9
Examples
softkey2 value: 411
Configurable through the configuration files only
Parameter softkeyN states
Optional parameter to define what states the softkey is
available for. If undefined, the softkey is available for the idle
state only.
Description
Text
Format
idle
Default Value
idle, connected, incoming, outgoing. N in the softkeyN type
ranges from 1 to 20. If defining multiple states, the list is
space delimited.
Range
softkey1 states: connected idle
Examples
Mapped Key Parameters
The following parameters can be used to map hard keys to custom-defined values.
Configurable through the configuration files only
Parameter map redial key to
maps the redial key to a custom-defined value
Description
string
Format
<empty>
Default Value
Any alphanumeric string, except “#”, “””, less than 10
characters
Range
map redial key to: 1014
Example
SIP 480i IP Phone Admin Guide 37