Filter
Top Products
Setting Parameters – SIP Settings
The following parameters are the settings specific to SIP authentication.
Configurable through the configuration files only
Parameter service provider *
If the service provider parameter is configured, the phone
will automatically try to populate these sip settings in the
following order if they are not already configured:
Description
• sip outbound proxy
• sip proxy ip
• sip proxy port
• sip registrar ip
• sip registrar port.
If the phone is unable to get the required information then
these sip settings should be entered manually.
host name or fully qualified host domain
Format
name
N/A
Default Value
N/A
Range
service provider: sip.serviceprovider.com
Example
*An SRV entry (conforming to RFC 2782) with the Name (refer Name in RFC 2782)
matching this parameter value in the DNS server is required.
Configurable through the configuration files only
Parameter sip outbound
p
rox
y
The name of the proxy server to which the sip messages will
be sent to, though it may not be the server resolved by the
Request - URI
Description
fully qualified host domain name or ip address
Format
N/A
Default Value
N/A
Range
sip outbound proxy: sip.proxy.com
Example
26 SIP 480i IP Phone Admin Guide