Filter
Top Products
The Vertical 480i Web Client
To access the Vertical 480i Web Client, open your web browser (supports Internet
Explorer and Gecko engine based browsers like Firefox, Mozilla or Netscape) and enter
the phone’s IP address into the address field, starting with the web prefix “http://”.
In the side menu of the Vertical 480i
Web Client, there are three main
categories: Status, User and Admin.
• The STATUS category contains
read only status information for
sub-categories Network,
Hardware and Firmware.
• The USER category contains
user configurable sub-categories
Reset and Password. This section
is accessed through the user level
or the administrator level user
name and password. You will be
prompted for this information
when one of these options is
selected. For more information,
refer to the Vertical SIP 480i IP
Phone User Guide.
• The ADMIN category contains
administrator only configurable
sub-categories: Network,
Firmware and SIP Settings. This
section is accessed through the
admin level user name and
password. You will be prompted
for this information when one of
these options is selected. For
more information, refer to the
section “Configuring the 480i IP
phone” of this document.
The default for the administrator user
name is “admin” and the password is
“22222”. For a user, the default user
name is “user” and the password field is
left blank. The user and administrator
level passwords can be changed using
the web client, or through the
configuration files.
6 SIP 480i IP Phone Admin Guide