Filter
Top Products
Getting Started
Phone Features
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 10
1
Message
Waiting/Status
Indicator
(continued)
• Orange (solid): Your phone is not registered to the
call control system. This occurs when the phone is
rebooting and has not yet registered.
• Orange (fast flashing): Your phone’s firmware is
upgrading.
• Orange (slow flashing): Your phone is downloading
firmware.
• Orange (series of two fast flashes): Your phone has
permanently lost its Ethernet connection. When the
phone is reconnected, it will reboot.
• Green (slow flashing): Call forwarding or Do Not
Disturb is turned on. (When you lift the handset, you
will also hear an interrupted dial tone.)
3.
Ringer switch Push to the On position to turn the ringer on. Push to
the Off position to turn the ringer off.
4.
Voicemail button Press to access voicemail (if set up by your phone
administrator).
5.
FLASH button Holds a call or transfers a call.
• If you are on a call and receive a new call, press
to place the first call on hold and answer
the new call. To toggle between the two calls,
press twice.
• To place a call on hold, press . To resume
the call, lift the handset and press twice.
• To transfer a call, press . Then enter the
extension number or phone number. After the
other phone starts ringing, wait for an answer or
immediately press to complete the
transfer.
6.
Redial button Press to redial the last number called.
#Phone FeatureDescription
FLASH
FLASH
FLASH
FLASH
FLASH
FLASH