Filter
Top Products
User’s Guide
78
Setting Day/Night Mode
If you have Day/Night Mode permissions, you can set the NexPath Telephony Server Day or Night mode.
Select Tools->Day/Night from the NexDial menu bar. Click on the radio button for the mode you wish to
set, the click OK to change the Day/Night mode setting. Click Cancel to cancel any changes and keep the
Day/Night mode the same.
Changing your password
To change your NexPath Telephony Server password, select Tools->Chg Password from the NexDial menu
bar. Enter your old four digit password, and your new four digit password, then click OK. Note that this is
the user password on the NexPath system, the same that you used for logging into NexDial or for accessing
your voice mail, and must be four numeric digits. Take care to remember your new password. Your system
administrator can recover your user password if you forget it, but recovering the administrator password is
very difficult and requires factory assistance.
Selecting the audio player
You can select the audio player of your choice for playing voice mail messages. The Windows program
mplayer32.exe is used by default. You may find that the component player mplay2.exe or
wmplay.exe in the Windows Media Player directory is preferable.
Voice mail If you have new (unread) voice mail, the VOICE MAIL button will
turn red in the lower left-hand corner of the NexDial window while
there are unread voice mail messages. You can press this button to pop
up a separate window to review your voice mail messages.
Do Not Disturb The words Do Not Disturb will flash in red whenever your extension
is in the Do Not Disturb mode.
user.bk Page 78 Wednesday, March 7, 2001 10:34 AM