Filter
Top Products
User’s Guide
30
Hook Flash the Central Office Line (Centrex and CLASS
SM
features)
Hook Flash the Central Office Line
You can send a hook flash to the central office line, rather than have the hook flash interpreted by the Nex-
Path Telephony Server. This is only useful if you have Centrex lines or CLASS
SM
features, such as three
way calling, enabled on your outside lines.
Note The ability to hook flash a Central Office line can be enabled or disabled on a CO line by CO line basis
in the NexPath Telephony Server. This feature must be enabled with the administration software in
order for the sequence to work. Otherwise the sequence is ignored.
To send a hook flash to the central office line (see the note above):
1. While connected to an outside (central office) line, enter . You should receive the signal from
the central office that the sequence is recognized, usually three short beeps and then central office dial
tone.
For example, to setup a three way call using CLASS
SM
features:
1. While connected to an outside (central office) line and talking to the first party, enter . You
should receive the signal from the central office that the sequence is recognized: three short beeps and
then central office dial tone.
2. Dial the second party.
3. When you are connected, enter again. You should now have a three way call.
Note You must subscribe to CLASS
SM
features from your telephone company in order to use the three way
calling described above.
Flash
9
Flash
9
Flash
9
Flash
9
user.bk Page 30 Wednesday, March 7, 2001 10:34 AM