Filter
Top Products
Operating with additional
base units
Diverse Executive and additional handsets may
be used with up to four Diverse 1015 and/or
Diverse 1010 base units.
When planning to use a handset at more than
one base unit, it is recommended that you:
• Assign a number to each base station, from
1 to 4.
• Number each handset (1 to 6) registered at
each base station.
• Register the handsets at base unit 2 (and 3
and 4 if used) using the same internal
number as on base unit 1.
• Activate the display of the base unit numbers
on each handset; see page 44.
If, while not using your Diverse handset, you move
out of range of the displayed base unit and within
range of another base unit, your radio link will be
automatically set up. (Provided your handset has
been registered with the new base unit.)
If, however, you move out of range of the displayed
base unit and within range of another base unit
during a call, you will lose your current call.
The handset display shows you if the handset is
located within range of a registered base unit. If the
symbol flashes continuously, it means the handset
is out of range of a registered base unit. If the
symbol is not flashing, you are in range.
46
Operating with additional
base unit
Diverse handsets
Diverse additional handset - Item Code: 871038.
Diverse Executive handset - Item Code: 871073.
Diverse 1000 handset. Item Code: 870915.
Please note. Diverse 1000 handsets will
not work on Diverse 1010 and 1015
base units.