Filter
Top Products
At the handset:
• Press and hold down the 1 button together
with the
PWR button until the display
shows
1– and flashing .
• Enter the 4 digit system code. (Factory
setting is 0000. To change it see page16.)
• Press the
#
button. The beeps stop after
about 10 seconds, and the display shows all
the available handset numbers.
• Select and enter one of these numbers.
This is now the handset’s internal number
and it is registered with the base unit.
Up to six handsets can be registered and
operated from the Diverse 1015 base unit. The
system allows you to make internal intercom
calls between two handsets while a third is
making an external call.
Each additional handset you purchase must be
registered at the base unit.
To register a handset
The handset must be switched OFF.
At the base unit:
• Press and hold down the green paging
button until you hear the continuous beeps
(after about 10-15 seconds).
You now have up to 1 minute to register the handset,
during which the beeps will continue.
PWR
1
44
Registering a new Diverse
handset with the base unit
Registering a new Diverse
handset with the base unit
Diverse handsets
Diverse additional handset - Item Code: 871038.
Diverse Executive handset - Item Code: 871073.
Diverse 1000 handset. Item Code: 870915.
Please note. Diverse 1000 handsets will
not work on Diverse 1010 and 1015
base units.