Filter
Top Products
To receive an external call
When the phone rings the display flashes EXT.
Press the
PHONE button on the handset and
speak
or
If the handset is on the base unit or charging
unit, simply lift it up and speak. You do not
need to press the
PHONE button.
At the end of the call, either press the
PHONE
button or replace the handset on the base unit.
To redial the last number
• Press the PHONE button.
• Press the LNR button. The last number you
called will be redialled automatically.
To redial any of the last three numbers
• Press and release the
LNR
button to display
the last three phone numbers in turn. Each
phone number can be up to 22 digits long.
• When the number you want to dial is
displayed, press the
PHONE button.
To end the call, press the
PHONE button or
replace the handset on the base.
LNR
LNR
Making and receiving calls
To make an external call
Ensure the handset is switched ON.
• Press the PHONE button. You hear the dial
tone. The ‘In Use’ light on the base unit
comes on. Display shows
EXT.
• Dial the number. The phone calls the number
and the display shows the number you have
dialled.
Alternatively, you can enter the phone number
you want first and then press the
PHONE button
to dial.
To end a call
• Press the PHONE button
or
• Place the handset back on the base unit.
12
Using your
Diverse 1015
If another handset is already being used to make an
external call, your handset will display ‘–’ flashing
and you will hear the internal ‘busy’ signal.
If connected to a switchboard with pulse dialling, you
can switch to tone dialling during a call by pressing
the ✱ button. This enables you to use systems such
as home banking. The Diverse 1015 will return to
pulse dialling on completion of the call.
EXT