Filter
Top Products
Using your Diverse 1015
answering machine
26
To play back your second outgoing
message (A2)
• Press the MODE button until the voice says
‘Operation Mode. Call Recording after
announcement 2’.
• Press the PLAY button. Your message is
played back. Along with any concluding
message.
• Stop playback at any time by pressing the
STOP button.
To delete your second outgoing message (A2)
• Press the MODE button again. Voice says
‘Operation Mode. Call Recording after
announcement 2’. Display shows
A2.
• Press the MODE button again. Voice says
‘Mode”.
• Press and hold the DELETE button until the
outgoing message is deleted.
MODE
PLAY
STOP
MODE
DELETE
To record a second outgoing message (A2)
• Press the MODE button until the voice says
‘Operation Mode. Call Recording after
announcement 2’. Display shows
A2.
• Press the MODE button. Voice says ‘Mode’.
• Press the RECORD button within 3 seconds.
Your handset rings.
• Press the PHONE button on your handset.
The voice says ‘Recording announcement’.
• Press the PHONE button to end the
recording.
• Your recording is played back.
or if
• You are including a concluding message
press the
GREEN button on the base station
immediately after recording your outgoing
message.
or
• You may leave silence for approximately
4 seconds after recording your outgoing
message. The voice prompts you for the
concluding message and you may then
record your concluding message.
• Press the PHONE button to end the recording.
• Both your outgoing message and the
concluding message is played back.
......................
......................
......................
......................
......................
88
VOLUME
+
–
MODE
ON/OFF
ANSWER
SKIP
SKIP
DELETE STOP RECORD
PLAY
MODE
RECORD