20
Using your
Diverse 1015
To switch the ‘in-range’ tone on and off
If you have taken the handset outside the
phone’s range – provided the handset is
switched on – you will hear a tone when you
come back within range. You can turn this
sound on and off. The factory setting is ON.
• Press the STO button.
• Press 3 then 5. Display shows the current
setting:
I = ON, O = OFF.
• Press 1 to switch the tone ON
or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the new
setting.
STO
3
DEF
5
JKL
To reset your Diverse 1015 base unit to
the original factory settings
The handset must be switched ON.
• Press the STO button.
• Press the # button.
• Press the 1 button.
• Enter the system code. (Factory setting is
0000. To change it see page 16.)
• Press the LNR button.
• Enter the code 2 5 0.
• Press the STO button to confirm.
This will reset:
• TONE/PULSE signalling to TONE.
• Access code/pause to NONE.
• Pause after the RCL button to NONE.
• Ring assignment to collective ringing
(explained on page 39).
It will also delete any new settings made for:
• Connections to a switchboard.
It will NOT reset:
• The system code.
• Handset registration settings.