BT Diverse 1015 Cordless Telephone User Manual


 
10
Setting up
Battery low warning
flashes and handset beeps to warn you
that the batteries are within 5-10 minutes of being
completely flat.
If the symbol flashes continuously, it means
the handset is either out of range or is not
registered with the base unit. To register, follow the
steps on page 44. All additional handsets you
purchase will need to be individually registered
with the base unit before they will work with the
Diverse 1015.
The symbol may also flash after
a power failure. Provided the handset has been
registered with the base, the symbol will stop
flashing after a while indicating the handset has
automatically re-registered to the base unit.
If it continues to flash, re-register the handset to
the base unit - see page 44.
Getting the most out of your batteries
Avoid replacing the handset on the base unit
between calls. It is best to keep the handset off the
base for a few hours at a time.
Please note: If you go out of range of a base unit
for a long time while your handset is switched ON,
it may take more than 20 minutes to ‘find’ the base
station again when you come back within range.
However, by simply switching the handset OFF for
a moment, then ON again, it will find the base
station within a few seconds.