Filter
Top Products
32
Using your Diverse 1015
answering machine
Time saver mode
Times saver is useful if you ring in from
another phone to see if you have any new
messages.
If you have new messages, your Diverse 1015
will announce after 2 rings. If you do not have
any new messages, your Diverse will not
answer until 4 rings. This enables you to end
your call before you are connected, saving you
time and money.
To set a pause before each message
play back
Normally, your Diverse 1015 will play back
messages continuously. You can set it to pause
between messages. The next message will not
be played back until you press the
SKIP
ᮣ
button.
• Press the STO button.
• Press the # button.
• Press the INT button.
• Press the 9 button.
either
• Enter 51 to insert a pause between messages.
or
• Enter 52 for continuous message playback.
• Press the STO button to confirm the setting.
STO
INT
9
WXYZ
To adjust the loudspeaker volume
At the base during playback:
• Press the + button to increase volume.
or
• Press the – button to decrease volume.
The setting is stored until adjusted again.
To intercept a call during message recording
You can interrupt a call from a handset while
your outgoing message is being played or while
a caller is leaving their message.
• Press the PHONE button or take the phone
off the base. The answering machine stops
recording and resets to Answer On and you
can take the call.
To adjust the number of rings before
incoming calls are answered
You can select the number of rings, from 1 to 4,
before incoming calls are answered by the
machine when it is switched ON.
• Press the STO button.
• Press the # button.
• Press the INT button.
• Press the 9 button.
• Press the 3 button.
• Press a button between 0-4 to set the number
of rings you want. (
0 = Time Saver mode,
see grey box opposite.)
• Press the STO button to confirm the setting.
+
–
STO
INT
9
WXYZ
3
DEF