Filter
Top Products
Using and changing the system
code and handset PIN
As a digital phone system, your Diverse 1015
provides excellent security against others
‘listening in’ to your calls. You can also
prevent unauthorised use of the handset(s).
Each handset needs to be registered with the
base unit. To do this you need to know and use
the system code.
The factory setting for both the system code
and handset PIN is 0000. If you do not wish to
change either, you can use this number for all
code and PIN - related functions.
If you want to use remote access
(i.e. call your Diverse 1015 from another
phone to play back your messages) you will
need to change the system code from 0000.
For instructions on using remote access, see
page 33.
16
Using your
Diverse 1015
To change a system code for the Diverse
1015 base unit
This protects your settings and helps prevent
unauthorised handsets using your system.
The factory setting for the system code is 0000.
You can change this to any 4-digit number.
Handset power must be switched to
ON. And
you must be in range of the base unit.
• Press the STO button then the
#
button.
• Press 8 on the keypad.
• Press the
✱
button.
• Enter the current system code. Factory
setting is 0000.
• Enter the 4-digit code you want.
• Confirm the code by entering it again.
• Press the STO button. The code is now
entered.
STO
8
TUV
✱