Filter
Top Products
9
If you experience any problems, please call the Helpline on or email
Getting started
2. Activate the batteries as described previously above.
3. Place the handset on the charger to charge for at least 24 hours. When the
handset is fully charged the icon will indicate that it is fully charged.
Your BT Synergy 5500 is ready for use.
Providing you have subscribed to your network’s Caller Display service,
the date and time is set automatically for all handsets when you receive
your rst call. The date and time is recorded with each answering machine
message you receive.
If you do not have a Caller Display service you can set the date and
time manually. Please see page 30 for these instructions.
If you ever need to remove the batteries, simply slide open the battery
compartment cover and pull the ribbon away from the handset to release
the batteries.