Filter
Top Products
29
If you experience any problems, please call the Helpline on or email
Base settings
If you have subscribed to your network’s Caller
Display service, your BT Synergy does not ring
until the caller information has been received and
displayed.
However, if you want your handset to ring
without waiting for the caller information to
be displayed, set First Ring to On. Please note
that this will mean the rst ring you hear will
be the default ringtone. This will change to any
ringtone you have set once the caller information
is displayed.
1. Press menU, scroll to settings and press select.
2. Scroll to set Base and press select.
3. Scroll to first ring and press select.
4. Press
or to on or off then press select to conrm.
5. Press Back to return to the previous menu level.
1. Press menU, scroll to settings and press select.
2. Scroll to set Base and press select.
3. Scroll to sYstem Pin and press select.
4. Enter the old PIN (original setting 0000) and press ok.
5. Enter the new PIN and press ok.
6. Re-enter the new PIN and press ok.
7. Press Back to return to the previous menu level.
1. Press menU, scroll to settings and press select.
2. Scroll to set Base and press select.
3. Scroll to master reset and press select.
4. Select Yes to conrm or no to cancel.
5. Enter the system PIN (original setting 0000) then press ok. The display will
show
reset comPlete then return to standby.
The System PIN is used when changing certain
settings and registration / de-registration. The
default setting is 0000. You can change this to
your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as
****.
You can restore your BT Synergy to its default
(original) settings.
It will not affect the phonebook, calls list or user’s
data, including personal/recorded outgoing
messages and answer machine messages.
All handsets registered to the base wil
be retained.
All text, answer machine, handset and base
settings will be reset.