Filter
Top Products
If you experience any problems, please call the Helpline on or email
30
You can set the time to either 12 or 24 hour
format, see page 31.
If you subscribe to your network’s caller display service, the base sets the date
and time for all handsets whenever a call is received. You can manually set the
time on an individual handset.
1. Press menU, scroll to clock & alarm and press select.
2. Date & time is highlighted, press select.
3. Enter the date using the format DD/MM/YY and press save.
4. Enter the time and press save.
5. Press Back to return to the previous menu level.
1. Press menU, scroll to clock & alarm and press select.
2. Scroll to alarm and press select.
3. Press
or to select on and press select.
4. Press
or to select once, mon-fri or on DailY and
press
select.
5. Enter the time you want the alarm and press save.
6. Press Back to return to the previous menu level.
1. Press menU, scroll to clock & alarm and press select.
2. Scroll to alarm and press select.
3. Press
or to select on or off and press select.
4. Press Back to return to the previous menu level.
Clock & alarm
When the alarm is set, the display shows
the
icon.
Each handset can have a different alarm setting.
Once an alarm has been set, you can switch the
setting on or off.
If the alarm was set to
once the will
disappear from the screen.
If set to
on DailY or mon-fri the will
remain on the screen.
If you are using the handset to make a call when
the alarm ring is due, the
ashes and you hear
a beep in the earpiece.