BT 5500 Telephone User Manual


 
If you experience any problems, please call the Helpline on  or email 
42
Your BT Synergy can digitally record up to 12
minutes of messages or up to 59 messages. Each
message can last up to a maximum of 3 minutes.
As well as recording incoming messages, you can
record memos for other users.
You can operate your answering machine from:
• the handset or the base.
• remotely, from any other Touchtone™
telephone, see page 47.
Your BT Synergy comes with two pre-recorded
outgoing messages, Answer and Record or
Answer Only, but if you wish you can record your
own.
You will need to set the date and time (if you
have not already done so) so that you will know
when each message was received, see page 30.
(The default day and time setting is 01/01/08
12:00PM.)
Answer delay sets the number of times your
BT Synergy will ring before the answer
machine picks up your call and starts playing
the outgoing message.
You can change this setting to between 2–9 rings
or Time Saver.
The default setting is 6 rings.
For information on Time Saver, see Switch your
answering machine on remotely, page 47.

When you have new messages, with the audible
message alert switched on, you will hear an
audible alert once at the handset. The default
setting is Off.

1. Press menU, scroll to answer macHine and press select.
2. Scroll to answer on/off and press select.
3. Scroll
or
to highlight on or off and press select. When
switched on the handset display shows
in idle.

1. Press . The new setting is announced.

1. Press menU, scroll to answer macHine and press select.
2. Scroll to answer settings and press select.
3. Scroll
or to answer DelaY and press select.
4. Scroll
or to the setting you want and press select.
5. Press Back to return to the previous menu level.

1. Press menU, scroll
to answer macHine and press select.
2. Scroll
to answer settings and press select.
3. Scroll
or to message alert and press select.
4. Scroll
or to highlight on or off and press select.
5. Press Back to return to standby.

When you have new answering machine messages, the screen shows YoU
Have x new messages. All new messages are indicated by a dot.
1. Press PlaY. Or, scroll
or the list of messages. Press PlaY to hear
the highlighted message.
Answering machine