BT 5500 Telephone User Manual


 
If you experience any problems, please call the Helpline on  or email 
56
Default PIN code = 0000
If registration is not successful rst time,
please repeat the process again incase the base
registration period ran out of time.
If there are already 5 handsets registered to
the base, the registration will fail. You must de-
register another handset before you can register
the new one.
You can use up to ve BT Synergy additional handsets with your BT Synergy
5500 base to extend your phone system without needing to install extension
sockets for each new phone.
Your BT Synergy 5500 handset can also be registered to up to 3 other bases.
You can then select the base you would prefer to use.
If you have purchased a BT Synergy 5500 multiple pack any additional
handsets come pre-registered to the base.
If you have purchased an additional handset separately you must register it to
your BT Synergy 5500 base before it can be used.

At the base:
1. Press and hold for 3 seconds until the base Power / In use starts ashing.
You have up to 60 seconds to register the handset.
At the handset:
1. If the handset is new and the display shows Please register. Press menU.
The display shows
registration. Press select.
Or
If the handset has already been registered to another base the standby
display is shown. Press
menU, scroll
or to registration
and press
select.
2. register HanDset is highlighted. Press select.
3. Bases are displayed. If necessary, scroll
or to a new base you wish
to register your BT Synergy 5500 handset to and press select.
4. Enter the system PIN and press ok.
5. The display shows searcHing Base x (where X is the chosen base number)
then
HanDset registereD.
The handset is automatically assigned the next available handset number.
Using additional handsets