Filter
Top Products
Chapter 3: Local Port Operation 27
2. Click Setup - Names to open the Names dialog box. Figure 3.3 shows the Names dialog box
populated with sample data.
Figure 3.3: Names Dialog Box
NOTE: If new DSRIQ modules are discovered by the DSR1021/1022 switch, the on-screen list will be
automatically updated. The mouse cursor will change into an hourglass during the update. No mouse or
keyboard input will be accepted until the list update is complete.
To assign names to target devices:
1. In the Names dialog box, select a target device name or port number and click Modify. The
Name Modify dialog box appears.
Figure 3.4 shows the Name Modify dialog box populated
with sample data.
Figure 3.4: Name Modify Dialog Box