Filter
Top Products
www.aerocomm.com
C OMPLIANCY INFORMATION
14
AGENCY IDENTIFICATION NUMBERS
Agency compliancy is a very important requirement for any product development. Aerocomm is in the process of
obtaining modular approval for its ZB2430 product family so that the OEM only needs to meet a few requirements to
use that approval. The corresponding agency identification numbers and approved antennas are listed below.
APPROVED ANTENNA LIST
The following antennas are approved for operation with the ZB2430 as identified. The OEM is free to choose another
vendor’s antenna of like type and equal or lesser gain as an antenna appearing in the table and still maintain
compliance.
FCC / IC REQUIREMENTS FOR MODULAR APPROVAL
In general, there are two agency classifications of wireless applications; portable and mobile.
Portable - Portable is a classification of equipment where the user, in general, will be within 20 cm of the transmitting
antenna. Portable equipment is further broken down into two classes; within 2.5 cm of human contact and beyond
2.5 cm (Note: Ankles, feet, wrists, and hands are permitted to be within 2.5 cm of the antenna even if the equipment is
designated as being greater than 2.5 cm). The ZB2430 is not agency approved for portable applications. The OEM is
required to have additional testing performed to receive this classification. Contact AeroComm for more details.
Table 10: Agency Identification Numbers
Part Number US/FCC CANADA/IC ETSI
ZB2430-D KQL-ZB2430D 2268C-ZB2430D Approved
ZB2430-100 KQL-ZB2430-100 2268C-ZB2430 Pending
Table 11: ZB2430 Approved Antenna List
Aerocomm Part
Number
Manufacturer Part
Number
Manufacturer Type
Gain
(dBi)
ZB2430-D
ZB2430-100
- FR05-S1-N-o-001 Fractus Integral Chip 2 - X
0600-00039 S151FC-L-(132)PX-2450S Nearson Omni 5 X X
WIC2450-A Laird/Centurion Chip 2 X -