Filter
Top Products
CONFIGURING THE ZB2430
32
Read Destination Address
The OEM Host issues this command to the transceiver to read the
Destination Address.
Command: <0xCC> <0x11>
Number of bytes returned: 4
Response: <0xCC> <0x00> <NWK Hi> <NWK Lo>
Parameter Range:
<NWK Hi> = MSB of destination radio’s NWK address
<NWK Lo> = LSB of destination radio’s NWK address
Auto Destination
The Host issues this command to change the Auto Destination
setting. When issuing this command, the Auto Destination setting
will only be changed if the corresponding enable bit is set.
Otherwise, the command performs a read of Auto Destination.
Command: <0xCC> <0x15> <Auto Dest>
Number of Bytes Returned: 2
Response: <0xCC> <Auto Dest>
Parameter Range:
<Auto Dest>= bit 7: Ignored
bit 6: Ignored
bit 5: Ignored
bit 4: Read=0, Write =1
bit 3: Ignored
bit 2: Ignored
bit 1: Ignored
bit 0: Auto Destination
Read API Control
The OEM Host issues this command to read the API Control byte. Command: <0xCC> <0x16>
Number of Bytes Returned: 2
Response: <0xCC> <API Control>
Parameter Range:
<API Control>=bits 7-3: 0
bit-2: Send Data Complete
bit-1: Transmit API
bit-0: Receive API
Write API Control
The OEM Host issues this command to write the API Control byte to
enable or disable the API features.
Command: <0xCC> <0x17> <API Control>
Number of Bytes Returned: 2
Response: <0xCC> <API Control>
Parameter Range:
<API Control>=bits 7-3: Ignored
bit-2: Send Data Complete
bit-1: Transmit API
bit-0: Receive API