Filter
Top Products
16.4 Desk PDM Charger
The Desk PDM charger is used for charging, but can also be used for
software download, and synchronizing of parameters. The charger is
delivered with a plug-in power supply and is connected into an ordinary
wall socket.
Figure 12 Desk PDM Charger
Note: Only use the charger within the temperature range of 5 - 40º C.
Using the Desk PDM charger for software download and synchronizing
parameters is most often done by system administrators, and requires that
the charger is connected either to the LAN and CPDM or to a PC with the
WinPDM software application installed. For a short description of CPDM
and WinPDM, see Section 16.8.
The charger is connected to a PC through the USB or one of the network
connectors, see Figure 13. When connecting the charger with a PC
through one of the network connectors the charger acts as a switch, which
makes it possible to connect the other connector to the LAN..
Figure 13 Network and USB Connectors
Note: Network and USB connectors are used to connect the desktop
charger to a PC running the WinPDM or to the LAN (not for
charging).
16.5 Rack PDM Charger
The charging rack is used for charging several phones, to synchronize
parameters, and for software download. The built in power supply can
charge up to six cordless phones.
16.6 Headset
The headset comes in two versions; with microphone integrated in the
cable, and with microphone on a boom. Connect the headset to the
headset connector marked
.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
83