Filter
Top Products
2. Select Mic on boom or Mic on cable, and press Select.
If the preconfigured headset profiles do not match the headset in use, or
the audio performance is bad, it is possible to configure an own headset
profile. This is done in WinPDM or CPDM, please contact your system
administrator.
15.2 Display
Display settings concern brightness and screen saver settings.
15.2.1 Contrast
To set contrast, do the following:
1. Press Menu, select Settings, and press Select.
2. Select Display and press Select.
3. Select Contrast, and press Select.
4. Step with ◄ or ►to adjust the contrast.
5. Press OK to save the setting.
15.3 Time and Date
You can set time and date by following the instructions in the following two
sections.
15.3.1 Setting Time Format
To set the time, do the following:
1. Press Menu, select Settings, and press Select.
2. Select Time & Date, and press Select.
3. Select Time format, and press Select.
The actual time is displayed. The formats to select from are the
following:
• 12:00 (AM/PM)
• 24:00
4. Press Back to save the settings.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
73