Filter
Top Products
9.8.2 Resume on Another Extension
To resume the call on another extension:
1. Call the extension where the call was put on hold and press
.
2. Press 8.
Note: France and New Zealand, press 4; Sweden, press 6.
9.9 Call Waiting
Note: The call waiting function might be blocked for use on your
extension. This needs to be configured in the WinPDM or CPDM
by your system administrator.
If you hear the call waiting tone during an ongoing conversation, another
person is trying to contact you. To answer the call, do any of the following:
Put the ongoing call on hold and answer the waiting call
1. Press R .
The ongoing call is put on hold and you are connected to the waiting
call.
Note: R is default for this function. If this soft key is reprogrammed to
something other than R, this function is disabled.
2. Press
to finish the call.
Wait for the system to recall the first party.
Terminate the ongoing call and answer the waiting call
1. Press
to finish the ongoing call.
The waiting call is signalled on your phone.
2. Press
to answer the new call.
9.10 Conference
With the conference function, up to seven parties can be included in a
conference. Only the conference leader (that is, the person initiating the
conference) can admit participants. During the conference a tone will be
heard every 15 seconds. A tone burst is heard each time a participant
enters or leaves the conference. When the conference leader leaves the
conference, the conference will continue with the other included parties.
The conversation is changed back to a normal two party connection when
there is only two parties left.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
52