Filter
Top Products
3. Do one of the following:
• Enter the third party's phone number and press
.
OR
• Press the
soft key, select a contact, press Select, and then
press Call.
Note: It is only possible to select a contact from the local and company
phonebook, but not from the central phonebook, when making an
inquiry.
When the third party answers, it is possible to switch between the calls
(refer back), transfer the call, create a conference, and end one of the
calls.
Note: If New call does not show when pressing More, it is possible to
press R and dial the third party to initiate the inquiry.
9.5.1 End Inquiry Call
When wanting to end the inquiry call, do the following:
1. Press More during the call.
2. Select End call and press Select.
The third party is disconnected, and you are connected to the first
party.
Note: If End call is not shown when pressing More, press R to return to
the first party.
9.5.2 Refer back
When having made an inquiry to another party, and wanting to switch
between the calls, do the following:
1. Press More, select Switch and press Select.
Note: If Switch does not show when pressing More, press 2 (for Sweden
press R) to refer back.
9.6 Transfer
Note: This feature needs to be configured in the WinPDM or CPDM.
Please contact your system administrator.
To transfer an ongoing call to another extension, do the following:
1. Press More, select New call and press Select.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
50