Filter
Top Products
2. Mark Owner ID, and press Select.
3. Enter a name and press Save to save the setting.
15.6 Changing Answering Method
The phone can be set to answer a call automatically when a headset is
used, or to answer a call by a press on any key.
You can also change the answering behavior to:
• Use Loudspeaking function directly when
is pressed.
• Automatically connect incoming call in Loudspeaker, without
pressing any key.
15.6.1 Normal Answering
The answering behavior is by default set to . It can be set to any key by
doing the following:
1. Press Menu, select Settings, and press Select.
2. Select Answering, and press Select.
3. Select Answering key, and press Select.
4. Select Any key and press Select.
5. Press Back to save the setting.
15.6.2 Automatic Answer
Note: The automatically answer mode is only relevant when a headset is
connected.
To set the phone to answer automatically, do the following:
1. Press Menu, select Settings, and press Select.
2. Mark Answering, and press Select.
3. Mark Answer behaviour, and press Select.
4. Mark Automatically and press Change to activate the automatic
mode.
5. Press Back to save the setting.
All incoming calls will be connected automatically when this
behavior is selected.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
77