Filter
Top Products
2. Select Sound & Alerts, and press Select.
3. Select Ring Signals, and press Select.
Different signals for internal calls, external calls and call back can
be set.
4. Select Internal call, External call or Callback, and press Select.
5. Select a ring signal, press Select, and press Back to save the
setting.
15.1.3 Switching Vibrator On and Off
To switch the vibrator on and off, do the following:
1. Press Menu, select Settings, and press Select.
2. Select Sound & Alerts, and press Select.
3. Select Vibrating alert, and press Select.
4. Choose between On, On when silent (that is, the vibrator is on
when the phone is muted), or Off, and press Select.
5. Press Back to save the setting.
15.1.4 Setting the Key Sound
This means that each time a key is used, the phone gives a small sound.
To enable this function, do the following:
1. Press Menu, select Settings, and press Select.
2. Mark Sounds & Alerts, and press Select.
3. Mark Key sound, and press Select.
4. Choose between Click, Tone or Silent.
It is possible to listen to the key sound by pressing Play.
5. Press Select.
6. Press Back to save the setting.
15.1.5 Headset Settings
In order to achieve optimal audio quality with the different headset types, it
is recommended to select the corresponding headset profile. The default
setting is microphone on a boom, that is, the audio is optimized for using a
headset with microphone on a boom. To change the headset profile, do the
following:
1. Press Menu, select Settings and press Select.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
72